fix:修改UDP通讯中，取电变化上报机制

1、问题点：当RCU网络状态异常的情况下，网络还处于协商状态下，还未进入正常通讯环节时，取电变化不会进行判断。这会导致取电变化上报与实际产生取电状态时间点对不上。 2、将BLV_C1F_Module代码上传至Gitea,之前代码修改记录请查看 .\BasicCode\Readme.txt
2026-01-23 09:23:12 +08:00
commit 95916b9995
622 changed files with 1336094 additions and 0 deletions
--- a/BasicCode/Drive/BLE/HAL/SLEEP.c
+++ b/BasicCode/Drive/BLE/HAL/SLEEP.c
@@ -0,0 +1,85 @@
+/********************************** (C) COPYRIGHT *******************************
+* File Name          : SLEEP.c
+* Author             : WCH
+* Version            : V1.1
+* Date               : 2019/11/05
+* Description        : ˯<><CBAF><EFBFBD><EFBFBD><EFBFBD>ü<EFBFBD><C3BC><EFBFBD><EFBFBD><EFBFBD>ʼ<EFBFBD><CABC>
+*******************************************************************************/
+
+/******************************************************************************/
+/* ͷ<>ļ<EFBFBD><C4BC><EFBFBD><EFBFBD><EFBFBD> */
+#include "CH57x_common.h"
+#include "HAL.h"
+
+
+/*******************************************************************************
+ * @fn          CH57X_LowPower
+ *
+ * @brief       <20><><EFBFBD><EFBFBD>˯<EFBFBD><CBAF>
+ *
+ * input parameters
+ *
+ * @param       time-<2D><><EFBFBD>ѵ<EFBFBD>ʱ<EFBFBD><CAB1><EFBFBD>㣨RTC<54><43><EFBFBD><EFBFBD>ֵ<EFBFBD><D6B5>
+ *
+ * output parameters
+ *
+ * @param       
+ *
+ * @return      None.
+ */
+u32 CH57X_LowPower( u32 time )
+{
+#if (defined (HAL_SLEEP)) && (HAL_SLEEP == TRUE)
+  u32 tmp,irq_status;
+
+  SYS_DisableAllIrq( &irq_status );
+  tmp = RTC_GetCycle32k();
+  if( (time < tmp) || ((time - tmp) < 30) ){ // <20><><EFBFBD><EFBFBD>˯<EFBFBD>ߵ<EFBFBD><DFB5><EFBFBD><EFBFBD><EFBFBD>ʱ<EFBFBD><CAB1>
+    SYS_RecoverIrq( irq_status );
+    return 2;
+  }    
+  RTC_SetTignTime( time );
+  SYS_RecoverIrq( irq_status );
+#if( DEBUG == Debug_UART1 )
+  while((R8_UART1_LSR&RB_LSR_TX_ALL_EMP)== 0 ) __nop();// ʹ<><CAB9><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ӡ<EFBFBD><D3A1>Ϣ<EFBFBD><CFA2>Ҫ<EFBFBD>޸<EFBFBD><DEB8><EFBFBD><EFBFBD>д<EFBFBD><D0B4><EFBFBD>
+#endif
+// LOW POWER-sleepģʽ
+  if( !RTCTigFlag ){
+		LowPower_Sleep(RB_PWR_RAM2K|RB_PWR_RAM14K|RB_PWR_EXTEND );
+		SetSysClock( CLK_SOURCE_HSI_32MHz );
+		DelayUs(1500);
+		SetSysClock( CLK_SOURCE_HSE_32MHz );
+  }
+  else{
+    return 3;
+  }
+#endif
+  return 0;
+}
+
+/*******************************************************************************
+ * @fn          HAL_SleepInit
+ *
+ * @brief       <20><><EFBFBD><EFBFBD>˯<EFBFBD>߻<EFBFBD><DFBB>ѵķ<D1B5>ʽ-RTC<54><43><EFBFBD>ѣ<EFBFBD><D1A3><EFBFBD><EFBFBD><EFBFBD>ģʽ
+ *
+ * input parameters
+ *
+ * @param       None.
+ *
+ * output parameters
+ *
+ * @param       
+ *
+ * @return      None.
+ */
+void HAL_SleepInit( void )
+{
+#if (defined (HAL_SLEEP)) && (HAL_SLEEP == TRUE)
+  R8_SAFE_ACCESS_SIG = SAFE_ACCESS_SIG1;		
+  R8_SAFE_ACCESS_SIG = SAFE_ACCESS_SIG2;
+  R8_SLP_WAKE_CTRL  |= RB_SLP_RTC_WAKE; // RTC<54><43><EFBFBD><EFBFBD>
+  R8_RTC_MODE_CTRL  |= RB_RTC_TRIG_EN;	// <20><><EFBFBD><EFBFBD>ģʽ
+  R8_SAFE_ACCESS_SIG = 0;						    // 
+  NVIC_EnableIRQ(RTC_IRQn);	
+#endif
+}