fix:修改UDP通讯中，取电变化上报机制

1、问题点：当RCU网络状态异常的情况下，网络还处于协商状态下，还未进入正常通讯环节时，取电变化不会进行判断。这会导致取电变化上报与实际产生取电状态时间点对不上。
2、将BLV_C1F_Module代码上传至Gitea,之前代码修改记录请查看 .\BasicCode\Readme.txt

BasicCode/Drive/RTC/rtc.h

@@ -0,0 +1,70 @@
+#ifndef _RTC_H_
+#define _RTC_H_
+
+#include "stdint.h"
+
+/*RTC<54><43><EFBFBD>Ŷ<EFBFBD><C5B6><EFBFBD>*/
+#define RTC_SDA_INPUT	GPIOB_ModeCfg(GPIO_Pin_8,GPIO_ModeIN_PU)
+#define RTC_SCL_INPUT	GPIOB_ModeCfg(GPIO_Pin_9,GPIO_ModeIN_PU)
+#define RTC_SDA_OUTPUT	GPIOB_ModeCfg(GPIO_Pin_8,GPIO_ModeOut_PP_20mA)
+#define RTC_SCL_OUTPUT	GPIOB_ModeCfg(GPIO_Pin_9,GPIO_ModeOut_PP_20mA)
+#define RTC_SDA_H		GPIOB_SetBits(GPIO_Pin_8)
+#define RTC_SCL_H		GPIOB_SetBits(GPIO_Pin_9)
+#define RTC_SDA_L		GPIOB_ResetBits(GPIO_Pin_8)
+#define RTC_SCL_L		GPIOB_ResetBits(GPIO_Pin_9)
+#define RTC_SDA			GPIOB_ReadPortPin(GPIO_Pin_8)
+#define RTC_SCL			GPIOB_ReadPortPin(GPIO_Pin_9)
+
+//RTC<54><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ַ
+#define RTC_Address 		0x64       
+
+typedef struct{
+	uint8_t	second;
+	uint8_t  minute;
+	uint8_t  hour;
+	uint8_t  week;
+	uint8_t  day;
+	uint8_t  month;
+	uint8_t  year;
+}S_RTC;
+
+typedef struct{
+	uint32_t hour;
+	uint16_t minute;
+	uint16_t second;
+}G_CORE_RTC;
+
+typedef struct{
+    uint8_t time_select;        //<2F><>ǰʱ<C7B0><CAB1>ѡ<EFBFBD><D1A1> 0x00:<3A><>ǰδѡ<CEB4><D1A1><EFBFBD><EFBFBD>0x01: ѡ<>񱾵ض<F1B1BEB5>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>0x02:Ӳ<><D3B2>CSIO RTCʱ<43><CAB1>
+    uint8_t csio_rtc_cnt;       //CSIO RTCʱ<43>Ӽ<EFBFBD><D3BC><EFBFBD>
+    
+	int16_t timezone;			//ʱ<><CAB1>ƫ<EFBFBD><C6AB><EFBFBD><EFBFBD>
+    uint32_t Mcu_GetTime_tick;
+}TIME_INFO_T;
+
+#if (USE_CORE_TYPE == 1)    //ʹ<><CAB9>C1F<31><46><EFBFBD>İ<EFBFBD> - ʹ<><CAB9>MCU RTC<54><43>ʱ
+
+
+#endif
+
+
+void RTC_Init(void);
+uint8_t RTC_ReadDate(S_RTC *psRTC);
+uint8_t RTC_WriteDate(S_RTC SetRTC);
+uint8_t RTC_DATA_Type_Cast_DEC(uint8_t data);
+void RTC_TASK(void);
+uint8_t RTC_TimeDate_Correct_Figure(uint8_t data);
+uint8_t HEX_Conversion_To_DEC(uint8_t c_num);
+uint8_t DEV_Conversion_To_HEX(uint8_t c_num);
+
+uint32_t RTC_Conversion_To_Unix(S_RTC *rtc_time);
+void Unix_Conversion_To_RTC(S_RTC *rtc_time,uint32_t utc_tick);
+
+extern S_RTC RTC_Raw_Data;
+extern S_RTC MCU_RTC_Data;
+extern S_RTC Net_RTC_Data;
+extern TIME_INFO_T g_time_info;
+
+uint8_t NetRTC_WriteDate(S_RTC SetRTC);
+
+#endif