#ifndef _UART_H_
#define _UART_H_

#include "apt32f102.h"
#include "apt32f102_uart.h"

#define Recv_2400_TimeOut     20       //ms
#define Recv_9600_TimeOut     10       //ms
#define Recv_115200_TimeOut     3       //ms

#define USART_BUFFER_NUM         3
#define USART_BUFFER_SIZE        100

#define UART_SEND_BUFFER_NUM        10
#define UART_SEND_BUFFER_SIZE       20

/*调试信息相关定义*/
#ifndef DBG_LOG_EN
#define DBG_LOG_EN          0       //DEBUG LOG 输出总开关
#endif

/*调试信息初始状态*/
#define DBG_OPT_Debug_STATUS        0       //临时调试信息打印开关
#define DBG_OPT_DEVICE_STATUS       0       //设备驱动层打印调试信息打印开关
#define DBG_OPT_SYS_STATUS          0       //系统调试信息打印开关

/*调试信息输出控制位*/
#define DBG_BIT_Debug_STATUS        2
#define DBG_BIT_DEVICE_STATUS       1
#define DBG_BIT_SYS_STATUS          0

#if DBG_LOG_EN
#define DBG_Printf(data,len)		UARTTransmit(UART1,data,len)	
#else 
#define DBG_Printf	
#endif	

typedef U8_T (*Uart_prt)(U8_T *,U16_T);

typedef enum
{
    UART_0,
    UART_1,
    UART_2,
    UART_3,
    UART_MAX,
}UART_IDX;

typedef struct{
    U8_T     RecvBuffer[USART_BUFFER_SIZE];
	U8_T 	 DealBuff[USART_BUFFER_SIZE];
    U8_T     Receiving;
	
    U16_T    RecvLen;
	U16_T    DealLen;

    U32_T    RecvTimeout;
    U32_T    RecvIdleTiming;

    Uart_prt    processing_cf;      //处理函数指针
}UART_t;

extern U32_T Dbg_Switch;

void UARTx_Init(UART_IDX uart_id, Uart_prt prt_cf);
void UART1_RecvINT_Processing(char data);
void UART1_TASK(void);

void Dbg_NoTick_Println(int DbgOptBit, const char *cmd, ...);
void Dbg_Print(int DbgOptBit, const char *cmd, ...);
void Dbg_Println(int DbgOptBit, const char *cmd, ...);
void Dbg_Print_Buff(int DbgOptBit, const char *cmd, U8_T *buff,U16_T len);


#endif