Imports System.Reflection
Imports System.Threading

Public Class Form1

    Private Shared Log_Data_Len_Max As Int16 = 512
    Dim Log_Data As New List(Of Parsing_Data_List)                 '用于保存文件打开后数据校验通过的日志

    ''' <summary>
    ''' 文件内容中的数据格式
    ''' </summary>
    Enum LOG_DATA_FORMAT
        Hand = 0
        SN            '日志每条数据增加序列号
        Len
        Len_8         '新增
        Check
        Date_H        '年：5bit 月：5bit 日：5bit
        Date_L
        Type
        Time8B        '小时时间戳
        Time16B
        Time24B
        Time32B
        Data
    End Enum

    ''' <summary>
    ''' 日志数据类型
    ''' </summary>
    Enum log_type
        ''' <summary>
        ''' Launcher信息记录
        ''' </summary>
        Launcher = 1
        ''' <summary>
        ''' 系统运行信息记录
        ''' </summary>
        SYS_Record
        ''' <summary>
        ''' 设备通讯记录
        ''' </summary>
        Device_COMM
        ''' <summary>
        ''' 设备通讯状态记录
        ''' </summary>
        Device_Online
        ''' <summary>
        ''' 所有设备状态定期记录 - 暂时还没用
        ''' </summary>
        Global_Parameters
        ''' <summary>
        ''' 网络通讯记录 - 暂时还没定
        ''' </summary>
        Net_COMM
        ''' <summary>
        ''' 逻辑处理记录 - 暂时还没定
        ''' </summary>
        Logic_Record

    End Enum
    ''' <summary>
    ''' 日志数据 - Launcher记录信息
    ''' </summary>
    Enum LLauncher
        ''' <summary>
        ''' 校验APP
        ''' </summary>
        App_Check = 1
        ''' <summary>
        ''' 读取APP
        ''' </summary>
        Read_App
        ''' <summary>
        ''' 写Flash
        ''' </summary>
        Write_Flash
        ''' <summary>
        '''  恢复出厂设置
        ''' </summary>
        Factory_Reset
        ''' <summary>
        ''' 复位信号源
        ''' 0x00：软件复位
        ''' 0x01：上电复位
        ''' 0x02：看门狗复位
        ''' 0x03：外部手动复位
        ''' 0x05：从下电模式唤醒时的复位 - 通过WCHISPTool烧录后的复位
        ''' </summary>
        Reset_Source
        ''' <summary>
        ''' Launcher中RCU按键事件
        ''' 0x01:点按
        ''' 0x02:长按
        ''' 0x03:长按松开
        ''' 0x04:达到恢复出厂设置
        ''' </summary>
        RCUKey_State
    End Enum
    ''' <summary>
    ''' 日志数据 - 系统运行信息
    ''' </summary>
    Enum LSYS
        ''' <summary>
        ''' PHY状态变化记录
        ''' </summary>
        PHY_Change = 1
        ''' <summary>
        ''' 设备链表信息错误
        ''' </summary>
        DevInfo_Error
        ''' <summary>
        ''' 升级状态
        ''' </summary>
        API_State
        ''' <summary>
        ''' 网络初始化参数
        ''' </summary>
        NET_ARGC
        ''' <summary>
        ''' MQTT参数
        ''' </summary>
        MQTT_ARGC
        ''' <summary>
        ''' 网络通讯状态
        ''' </summary>
        NetComm_State
        ''' <summary>
        ''' 网络默认参数
        ''' </summary>
        NET_DafaultARGC
        ''' <summary>
        ''' APP中RCU按键事件
        ''' </summary>
        RCUKey_State
    End Enum
    ''' <summary>
    ''' 日志数据 - 设备通讯信息
    ''' </summary>
    Enum LCOMM
        ''' <summary>
        ''' 轮询回复数据
        ''' </summary>
        ASK_TO_Reply = 1
        ''' <summary>
        ''' RCU下发控制数据
        ''' </summary>
        Send_Control
        ''' <summary>
        ''' RCU控制回复数据
        ''' </summary>
        Control_Reply
        ''' <summary>
        ''' 设备调整波特率
        ''' </summary>
        Adjust_Baud
    End Enum
    ''' <summary>
    ''' 日志数据 - 所有设备状态信息
    ''' </summary>
    Enum LGlobal
        ''' <summary>
        ''' 参数数据
        ''' </summary>
        G_Para = 1
        ''' <summary>
        ''' 设备数据
        ''' </summary>
        G_Dev
    End Enum

    Enum LNetComm
        N_Send = 1               '网络发送数据
        N_Recv                   '网络接收数据
    End Enum

    Enum LLogic
        L_DebugString = 1     'Debug调试日志
    End Enum


    Enum LOG_DEV_State
        Online = &H1
        Offline = &H2
    End Enum
    ''' <summary>
    ''' BLV设备类型
    ''' </summary>
    Enum BLV_DEVICE_TYPE

        RS485_Switch = &H6      'T1开关
        RS485_Temp = &H7        'T1温控器
        RS485_Card = &HA        'T1插卡取电
        RS485_IR_SEND = &HF     '红外转发
        RS485_RGB_Light = &H12  'RGB灯带
        RS485_XiaoBao = &H13    '小宝语音
        RS485_Time = &H23       '时间同步

        C12Dimming = &H12       'BLV_Cx Dimming设备
        C5Music = &H15          'BLV_Cx MUSIC设备
        C5IO = &HF1             'BLV_Cx IO设备
        PC_TEST = &HF2          'BLV_Cx PC测试
    End Enum


    ''' <summary>
    ''' 解析表格排序
    ''' </summary>
    Enum form_grid1
        type
        sn
        data_date
        data_time
        data_interval_time
        data_len
        data_content
        data_parsing
    End Enum

    ''' <summary>
    ''' 数据时间结构
    ''' </summary>
    Class LOG_DATE
        Public year As Int32
        Public month As Int32
        Public day As Int32
        Public hour As Int32
        Public minute As Int32
        Public second As Int32
        Public milliscond As Int32
    End Class

    ''' <summary>
    ''' 温控器设备数据结构
    ''' </summary>
    Class Device_Temp
        Public on_off As Byte       '开关机
        Public mode As Byte         '模式
        Public fan As Byte          '风速
        Public valve As Byte        '阀门
        Public set_temp As Byte     '设置温度
        Public indoor_temp As Byte  '室内温度
    End Class


    Class Parsing_Data_List
        Public original_data() As Byte
        Public type As Byte
        Public sn As Byte
        Public tick As New LOG_DATE
        Public len As Int32
        Public interval_time As Int64
        Public data() As Byte
        Public parsing As String

    End Class

    ''' <summary>
    ''' 延时函数
    ''' </summary>
    ''' <param name="Interval">单位：ms</param>
    Public Sub delay(ByRef Interval As Double)
        Dim time As DateTime = DateTime.Now
        Dim Span As Double = Interval * 10000 '因为时间是以100纳秒为单位。
        While ((DateTime.Now.Ticks - time.Ticks) < Span)
            Application.DoEvents()
        End While
    End Sub

    Public Sub delay_us(ByRef Interval As Double)
        Dim time As DateTime = DateTime.Now
        Dim Span As Double = Interval * 10 '因为时间是以100纳秒为单位。
        While ((DateTime.Now.Ticks - time.Ticks) < Span)
            Application.DoEvents()
        End While
    End Sub

    ''' <summary>
    ''' 获取设备类型
    ''' </summary>
    ''' <returns></returns>
    Public Function Obtaining_The_Device_Type(data As Byte) As String
        Dim data_parsing As String

        Select Case data
            Case BLV_DEVICE_TYPE.C12Dimming
                data_parsing = "C12调光设备"
            Case BLV_DEVICE_TYPE.C5IO
                data_parsing = "C5IO设备"
            Case BLV_DEVICE_TYPE.C5Music
                data_parsing = "C5Music设备"
            Case BLV_DEVICE_TYPE.PC_TEST
                data_parsing = "BLV PC TEST"
            Case BLV_DEVICE_TYPE.RS485_Card
                data_parsing = "RS485 插卡取电"
            Case BLV_DEVICE_TYPE.RS485_IR_SEND
                data_parsing = "RS485 红外转发"
            Case BLV_DEVICE_TYPE.RS485_RGB_Light
                data_parsing = "RS485 RGB灯带"
            Case BLV_DEVICE_TYPE.RS485_Switch
                data_parsing = "RS485 开关"
            Case BLV_DEVICE_TYPE.RS485_Temp
                data_parsing = "RS485 温控器"
            Case BLV_DEVICE_TYPE.RS485_Time
                data_parsing = "时间同步"
            Case BLV_DEVICE_TYPE.RS485_XiaoBao
                data_parsing = "RS485 小宝语音"
            Case Else
                data_parsing = $"未知设备:{data}"
        End Select

        Return data_parsing
    End Function

    Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
        Using xml As New OpenFileDialog

            Dim Myfso() As Byte
            xml.Filter = $"流程文件(*.dat)|*.dat"


            If xml.ShowDialog() = DialogResult.OK Then
                TextBox1.Text = xml.FileName
                Console.WriteLine(xml.FileName)

                RichTextBox1.Clear()

                Grid1.NewFile()             '重新新建空间
                Grid_Format_initial()
                Grid1.AutoRedraw = False
                Log_Data.Clear()


                'DataGridView1.Rows.Clear()

                Myfso = My.Computer.FileSystem.ReadAllBytes(TextBox1.Text)
                'Data_string = BitConverter.ToString(Myfso)
                'Data_string = Data_string.Replace("-", " ")
                'TextBox2.Text = Data_string

                Dim file_data As New List(Of Byte())

                'MsgBox("I am ok")

                file_data = File_Data_Processed(Myfso, RichTextBox1)

                'MsgBox("File Open Succ")

                Grid1.AutoRedraw = False    '禁止刷
                File_Data_Parsing_To_List(file_data)
                Grid1.AutoRedraw = True
                Grid1.Refresh()             '加载数据
                'MsgBox(BitConverter.ToString(Myfso))           '弹框显示内容

            End If
        End Using
    End Sub

    Dim g_DataTotalLen As ULong = 0
    Dim g_DataProcessingIdx As ULong = 0

    ''' <summary>
    ''' 文件数据处理函数 - 分包，校验
    ''' </summary>
    ''' <param name="file_data"></param>
    ''' <param name="show_form"></param>
    ''' <returns></returns>
    Private Function File_Data_Processed(file_data As Byte(), show_form As RichTextBox) As List(Of Byte())
        'Dim sampleArr As String()

        Dim data_list As New List(Of Byte())
        Dim sampleArr_len As UInt32 = 0
        Dim sampleArr_showlen As UInt32 = 0


        Dim data_len As UInt16
        Dim data_end As Byte

        sampleArr_len = file_data.Length

        Console.WriteLine("File Data Len:" & sampleArr_len)

        '  Dim wacth As New Stopwatch
        ' wacth.Restart()         '开启计时

        g_DataTotalLen = sampleArr_len

        While sampleArr_showlen < sampleArr_len

            g_DataProcessingIdx = sampleArr_showlen


            If file_data(sampleArr_showlen) = &HA5 And sampleArr_showlen + 3 < sampleArr_len Then                 '判断文件头

                data_len = file_data(sampleArr_showlen + LOG_DATA_FORMAT.Len) Or (file_data(sampleArr_showlen + LOG_DATA_FORMAT.Len_8) << 8)            '读取数据长度

                If data_len < Log_Data_Len_Max And sampleArr_showlen + data_len - 1 < file_data.Length Then
                    data_end = file_data(sampleArr_showlen + data_len - 1)

                    Console.WriteLine($"Data Len :{data_len:d} Data :{data_end:X}")

                    If sampleArr_showlen + data_len <= sampleArr_len AndAlso file_data(sampleArr_showlen + data_len - 1) = &H5A Then  '判断文件尾

                        Dim data_buff(data_len - 1) As Byte
                        Dim data_string As String

                        Array.Copy(file_data, sampleArr_showlen, data_buff, 0, data_len)

                        If GetSumCheckMod(data_buff, data_len) = &H0 Then
                            Console.WriteLine("Data Check Succ !\r\n")

                            'Parsing_a_piece_of_data(data_buff, show_form， DataGridView1)

                            data_list.Add(data_buff)                '保存一份数据，添加到列表中
                            sampleArr_showlen += data_len           '数据偏移

                            data_string = BitConverter.ToString(data_buff)
                            data_string = data_string.Replace("-", " ")
                            Console.WriteLine(data_string)
                        Else
                            Console.WriteLine("Data Check Fail !\r\n")
                        End If

                    Else
                        sampleArr_showlen += 1
                        Console.WriteLine("Data Len Fail!!! Now Len:" & sampleArr_showlen)
                    End If

                    'delay_us(1)

                Else
                    sampleArr_showlen += 1
                    Console.WriteLine("Data Len Error!!! " & sampleArr_showlen)
                End If

            Else
                sampleArr_showlen += 1
            End If

        End While

        '   wacth.Stop()    '计时结束
        ' Console.WriteLine($"time span:{wacth.ElapsedMilliseconds}")


        Return data_list
    End Function

    ''' <summary>
    ''' 和校验取余数
    ''' 求Byte数组的和校验取余数
    ''' </summary>
    ''' <param name="dataPacket">Byte数组</param>
    ''' <returns></returns>
    Public Function GetSumCheckMod(dataPacket As Byte(), datalen As Byte) As Byte
        Dim sum As Integer
        For idx = 0 To datalen - 1
            sum += dataPacket(idx)
            sum = sum And &HFF
        Next
        Dim sumMod As Byte = &HFF - sum
        Return sumMod
    End Function

    ''' <summary>
    ''' 解析数据格式和内容
    ''' </summary>
    ''' <param name="file_data"></param>
    ''' <param name="show_form"></param>
    Public Sub Parsing_a_piece_of_data(file_data As Byte(), show_form As RichTextBox, show_grid As DataGridView)

        Dim data_date As Int32
        Dim hour_tick As Int32
        Dim hour_temp As Int32

        Dim show_string As String
        Dim grid As Integer
        Dim save_data As New Parsing_Data_List

        '添加新行
        grid = show_grid.Rows.Add()
        grid = show_grid.Rows.Count
        grid = grid - 1

        save_data.original_data = file_data                                         '保存原始数据
        save_data.sn = file_data(LOG_DATA_FORMAT.SN)                                '数据序列号
        save_data.type = file_data(LOG_DATA_FORMAT.Type)                            '数据类型
        hour_temp = file_data(LOG_DATA_FORMAT.Len_8)
        save_data.len = (file_data(LOG_DATA_FORMAT.Len) Or (hour_temp << 8)) - LOG_DATA_FORMAT.Data       '数据长度

        If save_data.len > Log_Data_Len_Max Then
            'save_data.len = Log_Data_Len_Max
            Return
        End If

        data_date = (file_data(LOG_DATA_FORMAT.Date_L) And &HFF)                    '记录时间
        hour_temp = file_data(LOG_DATA_FORMAT.Date_H)
        data_date = data_date Or (hour_temp << 8)

        show_grid.Rows(grid).Cells(form_grid1.sn).Value = save_data.sn
        show_grid.Rows(grid).Cells(form_grid1.type).Value = Parsing_Data_Type(save_data.type)
        show_grid.Rows(grid).Cells(form_grid1.data_len).Value = save_data.len

        '错误跳过
        Try
            'dRow.Cells(form_grid1.sn).Value = data_sn
        Catch ex As Exception
            ' Console.WriteLine($"Error:{ ex.Message}")
        End Try

        hour_tick = file_data(LOG_DATA_FORMAT.Time8B)
        hour_temp = file_data(LOG_DATA_FORMAT.Time16B)
        hour_tick = hour_tick Or (hour_temp << 8)
        hour_temp = file_data(LOG_DATA_FORMAT.Time24B)
        hour_tick = hour_tick Or (hour_temp << 16)
        hour_temp = file_data(LOG_DATA_FORMAT.Time32B)
        hour_tick = hour_tick Or (hour_temp << 24)
        '日期换算
        save_data.tick.year = (data_date >> 10) And &H1F
        save_data.tick.month = (data_date >> 5) And &H1F
        save_data.tick.day = (data_date) And &H1F


        save_data.tick.hour = hour_tick \ 3600000
        hour_temp = hour_tick Mod 3600000
        save_data.tick.minute = hour_temp \ 60000
        hour_temp = hour_temp Mod 60000
        save_data.tick.second = hour_temp \ 1000
        save_data.tick.milliscond = hour_temp Mod 1000

        Console.WriteLine($"Data SN:{save_data.sn:d} TYPE:{save_data.type:d} Len:{save_data.len:d} data_date:{data_date:X} hour_tick:{hour_tick:X}")
        show_string = $"Data SN:{save_data.sn,-3} TYPE:{save_data.type:d}   Len:{save_data.len,-3} data_date:{data_date:X} hour_tick:{hour_tick:X}" & vbCrLf
        show_form.SelectionStart = show_form.TextLength
        show_form.SelectionColor = Color.Blue
        show_form.AppendText(show_string)

        show_string = $"20{save_data.tick.year:00}-{save_data.tick.month}-{save_data.tick.day}"
        show_grid.Rows(grid).Cells(form_grid1.data_date).Value = show_string
        show_string = $"{save_data.tick.hour:00}:{save_data.tick.minute:00}:{save_data.tick.second:00}.{save_data.tick.milliscond:00}"
        show_grid.Rows(grid).Cells(form_grid1.data_time).Value = show_string

        Console.WriteLine($"20{save_data.tick.year:00}-{save_data.tick.month}-{save_data.tick.day} {save_data.tick.hour}:{save_data.tick.minute}:{save_data.tick.second:00} {save_data.tick.milliscond}")
        show_string = $"20{save_data.tick.year:00}-{save_data.tick.month}-{save_data.tick.day} {save_data.tick.hour}:{save_data.tick.minute}:{save_data.tick.second:00} [{save_data.tick.milliscond,-4}] :"
        show_form.SelectionStart = show_form.TextLength
        show_form.SelectionColor = Color.Red
        show_form.AppendText(show_string)

        Dim copy As UInt16 = save_data.len - 1
        Dim parsing_data(copy - 1) As Byte
        Dim parsing_string As String
        Array.Copy(file_data, LOG_DATA_FORMAT.Data, parsing_data, 0, copy)

        save_data.data = parsing_data
        parsing_string = BitConverter.ToString(parsing_data)
        parsing_string = parsing_string.Replace("-", " ")

        Console.WriteLine($"parsing_string:{parsing_string}")
        show_string = $"{parsing_string}" & vbCrLf

        show_grid.Rows(grid).Cells(form_grid1.data_content).Value = show_string

        'Console.WriteLine(parsing_data.ToString)
        'show_string = parsing_data.ToString & vbCrLf

        show_form.SelectionStart = show_form.TextLength
        show_form.SelectionColor = Color.Black
        show_form.AppendText(show_string)

        save_data.parsing = Parsing_Data_Content(save_data.type, parsing_data)        '解析数据
        Console.WriteLine(save_data.parsing)

        show_form.SelectionStart = show_form.TextLength
        show_form.SelectionColor = Color.Gray
        show_form.AppendText(save_data.parsing)
        show_grid.Rows(grid).Cells(form_grid1.data_parsing).Value = save_data.parsing

        '将解析后的数据添加到列表中
        Log_Data.Add(save_data)

        Grid_ADD_LOG_Data(Log_Data, Grid1)

        '数据解析完毕，计算时间差
        show_grid.Rows(grid).Cells(form_grid1.data_interval_time).Value = Get_Data_Time_Difference(Log_Data)

        'DataGridView1.Rows.Add(Parsing_Data_Type(data_type), data_sn.ToString)         '添加数据到表格中
    End Sub

    ''' <summary>
    ''' 计算当前数据与上次时间差值，单位:ms
    ''' </summary>
    ''' <param name="data_list"></param>
    ''' <returns></returns>
    Public Function Get_Data_Time_Difference(data_list As List(Of Parsing_Data_List)) As Int64
        Dim temp_tick As Int64 = 0
        Dim temp_time As New LOG_DATE
        Dim temp_time2 As New LOG_DATE
        Dim temp_num As Int32

        temp_num = data_list.Count      '获取当前数据列表中有多少条数据
        Console.WriteLine($"now list num:{temp_num:00}")

        If temp_num >= 2 Then

            temp_time.year = data_list(temp_num - 1).tick.year + 2000

            If data_list(temp_num - 1).tick.month = 0 Then
                temp_time.month = data_list(temp_num - 1).tick.month + 1
            Else
                temp_time.month = data_list(temp_num - 1).tick.month
            End If

            If data_list(temp_num - 1).tick.day = 0 Then
                temp_time.day = data_list(temp_num - 1).tick.day + 1
            Else
                temp_time.day = data_list(temp_num - 1).tick.day
            End If
            temp_time.hour = data_list(temp_num - 1).tick.hour
            temp_time.minute = data_list(temp_num - 1).tick.minute
            temp_time.second = data_list(temp_num - 1).tick.second
            temp_time.milliscond = data_list(temp_num - 1).tick.milliscond

            temp_time2.year = data_list(temp_num - 2).tick.year + 2000
            If data_list(temp_num - 2).tick.month = 0 Then
                temp_time2.month = data_list(temp_num - 2).tick.month + 1
            Else
                temp_time2.month = data_list(temp_num - 2).tick.month
            End If

            If data_list(temp_num - 2).tick.day = 0 Then
                temp_time2.day = data_list(temp_num - 2).tick.day + 1
            Else
                temp_time2.day = data_list(temp_num - 2).tick.day
            End If
            temp_time2.hour = data_list(temp_num - 2).tick.hour
            temp_time2.minute = data_list(temp_num - 2).tick.minute
            temp_time2.second = data_list(temp_num - 2).tick.second
            temp_time2.milliscond = data_list(temp_num - 2).tick.milliscond

            Console.WriteLine($"时间：{temp_time.year}-{temp_time.month}-{temp_time.day} {temp_time.hour}:{temp_time.minute}:{temp_time.second}.{temp_time.milliscond}")
            Console.WriteLine($"时间：{temp_time2.year}-{temp_time2.month}-{temp_time2.day} {temp_time2.hour}:{temp_time2.minute}:{temp_time2.second}.{temp_time2.milliscond}")
            Dim temp_date1 As New DateTime(temp_time.year, temp_time.month, temp_time.day, temp_time.hour, temp_time.minute, temp_time.second)
            Dim temp_date2 As New DateTime(temp_time2.year, temp_time2.month, temp_time2.day, temp_time2.hour, temp_time2.minute, temp_time2.second)


            'Console.WriteLine(temp_date1.ToString())


            temp_tick = DateDiff(DateInterval.Second, temp_date2, temp_date1)       'temp_date1 - temp_date2
            Console.WriteLine($"时间戳：{temp_tick}s")
            temp_tick = temp_tick * 1000 + temp_time.milliscond - temp_time2.milliscond

            Console.WriteLine($"时间戳：{temp_tick}ms")


        End If


        Return temp_tick
    End Function

    Public Function Get_Data_Time_Difference2(data_list As List(Of Parsing_Data_List), data As Parsing_Data_List) As Int64
        Dim temp_tick As Int64 = 0
        Dim temp_time As New LOG_DATE
        Dim temp_time2 As New LOG_DATE
        Dim temp_num As Int32

        temp_num = data_list.Count      '获取当前数据列表中有多少条数据
        Console.WriteLine($"now list num:{temp_num:00}")

        If temp_num >= 1 Then

            temp_time.year = data.tick.year + 2000

            If data.tick.month = 0 Then
                temp_time.month = data.tick.month + 1
            Else
                temp_time.month = data.tick.month
            End If

            If data.tick.day = 0 Then
                temp_time.day = data.tick.day + 1
            Else
                temp_time.day = data.tick.day
            End If



            temp_time.hour = data.tick.hour
            temp_time.minute = data.tick.minute
            temp_time.second = data.tick.second
            temp_time.milliscond = data.tick.milliscond

            temp_time2.year = data_list(temp_num - 1).tick.year + 2000
            If data_list(temp_num - 1).tick.month = 0 Then
                temp_time2.month = data_list(temp_num - 1).tick.month + 1
            Else
                temp_time2.month = data_list(temp_num - 1).tick.month
            End If

            If data_list(temp_num - 1).tick.day = 0 Then
                temp_time2.day = data_list(temp_num - 1).tick.day + 1
            Else
                temp_time2.day = data_list(temp_num - 1).tick.day
            End If
            temp_time2.hour = data_list(temp_num - 1).tick.hour
            temp_time2.minute = data_list(temp_num - 1).tick.minute
            temp_time2.second = data_list(temp_num - 1).tick.second
            temp_time2.milliscond = data_list(temp_num - 1).tick.milliscond

            Console.WriteLine($"时间：{temp_time.year}-{temp_time.month}-{temp_time.day} {temp_time.hour}:{temp_time.minute}:{temp_time.second}.{temp_time.milliscond}")
            Console.WriteLine($"时间：{temp_time2.year}-{temp_time2.month}-{temp_time2.day} {temp_time2.hour}:{temp_time2.minute}:{temp_time2.second}.{temp_time2.milliscond}")
            Dim temp_date1 As New DateTime(temp_time.year, temp_time.month, temp_time.day, temp_time.hour, temp_time.minute, temp_time.second)
            Dim temp_date2 As New DateTime(temp_time2.year, temp_time2.month, temp_time2.day, temp_time2.hour, temp_time2.minute, temp_time2.second)


            'Console.WriteLine(temp_date1.ToString())


            temp_tick = DateDiff(DateInterval.Second, temp_date2, temp_date1)       'temp_date1 - temp_date2
            Console.WriteLine($"时间戳：{temp_tick}s")
            temp_tick = temp_tick * 1000 + temp_time.milliscond - temp_time2.milliscond

            Console.WriteLine($"时间戳：{temp_tick}ms")


        End If

        Return temp_tick
    End Function

    ''' <summary>
    ''' 解析回复数据协议内容
    ''' </summary>
    ''' <returns></returns>
    Public Function Parses_The_RelayContent_Of_The_Packet(pack_data As Byte(), port As Byte) As String
        Dim data_parsing As String = ""

        Select Case port
            Case 0      'C1F - 485_1轮询端口

            Case 1      'C1 - 485_1轮询端口

            Case 2      '主动端口数据

            Case 3      '目前端口3的数据都属于BUS数据
                If Form_C5IO.Parse_RelayData_Protocol_Content(pack_data, data_parsing) = &H0 Then


                End If
        End Select

        Return data_parsing
    End Function


    ''' <summary>
    ''' 数据类型转化String
    ''' </summary>
    ''' <param name="data_type"></param>
    ''' <returns></returns>
    Public Function Parsing_Data_Type(data_type As Byte) As String
        Dim type_string As String

        Select Case data_type
            Case log_type.Launcher
                type_string = "Launcher信息"
            Case log_type.SYS_Record
                type_string = "RCU运行信息"
            Case log_type.Device_COMM
                type_string = "设备通讯"
            Case log_type.Device_Online
                type_string = "设备通讯状态"
            Case log_type.Global_Parameters
                type_string = "全局状态"
            Case log_type.Net_COMM
                type_string = "网络通讯"
            Case log_type.Logic_Record
                type_string = "逻辑处理"
            Case Else
                type_string = "类型错误"
        End Select

        Return type_string
    End Function

    ''' <summary>
    ''' 数据类型是否有效，类型有效返回：0,无效返回：1
    ''' </summary>
    ''' <param name="data_type"></param>
    ''' <returns></returns>
    Public Function Judge_Data_Type_Correct(data_type As Byte) As Byte
        Dim rev_type As Byte

        Select Case data_type
            Case log_type.Launcher
                rev_type = &H0
            Case log_type.SYS_Record
                rev_type = &H0
            Case log_type.Device_COMM
                rev_type = &H0
            Case log_type.Device_Online
                rev_type = &H0
            Case log_type.Global_Parameters
                rev_type = &H0
            Case log_type.Net_COMM
                rev_type = &H0
            Case log_type.Logic_Record
                rev_type = &H0
            Case Else
                rev_type = &H1
        End Select

        Return rev_type
    End Function

    ''' <summary>
    ''' 解析数据内容
    '''     按照数据类型来解析,用于加载表格时的数据显示 - 简单的内容解析
    ''' </summary>
    ''' <param name="data_content"></param>
    ''' <returns></returns>
    Public Function Parsing_Data_Content(data_type As Byte, data_content As Byte()) As String
        Dim parsing As String = "无"

        Dim dev_temp As New Device_Temp

        Select Case data_type
            Case log_type.Launcher
                parsing = Parsing_LogData_Launcher_Content(data_content)
            Case log_type.SYS_Record
                parsing = Parsing_LogData_SYS_Record_Content(data_content)
            Case log_type.Device_COMM
                parsing = Parsing_LogData_Device_COMM_Content(data_content)
            Case log_type.Device_Online
                parsing = Parsing_LogData_Device_Online_Content(data_content)
            Case log_type.Global_Parameters
                parsing = Parsing_LogData_Global_Parameters_Content(data_content)
            Case log_type.Net_COMM
                parsing = Parsing_LogData_Net_COMM_Content(data_content)
            Case log_type.Logic_Record
                parsing = Parsing_LogData_Logic_Record_Content(data_content)
            Case Else
                parsing = " 数据类型错误"
        End Select

        Return parsing
    End Function

    ''' <summary>
    ''' Launcher类型数据解析
    ''' </summary>
    ''' <param name="data_content"></param>
    ''' <returns></returns>
    Public Function Parsing_LogData_Launcher_Content(data_content As Byte()) As String
        Dim parsing As String
        Dim Launcher_type As Byte = data_content(0)

        Select Case Launcher_type
            Case LLauncher.App_Check
                parsing = "校验APP:"
                If data_content(1) = &H0 Then
                    parsing += "相同"
                ElseIf data_content(1) = &H1 Then
                    parsing += "APP版本号不同"
                ElseIf data_content(1) = &H2 Then
                    parsing += "特征区CRC不同"
                ElseIf data_content(1) = &H3 Then
                    parsing += "Flash APP地址错误"
                ElseIf data_content(1) = &H4 Then
                    parsing += "Flash APP数据校验错误"
                ElseIf data_content(1) = &H5 Then
                    parsing += "Flash APP标志未置位"
                ElseIf data_content(1) = &H6 Then
                    parsing += "Flash 特征区的CRC校验错误"
                ElseIf data_content(1) = &H7 Then
                    parsing += "MCU Flash数据校验错误"
                ElseIf data_content(1) = &H8 Then
                    parsing += "MCU Flash的APP标志未置位"
                ElseIf data_content(1) = &H9 Then
                    parsing += "MCU Flash特征区的CRC校验错误"
                Else
                    parsing += "数据错误"
                End If

            Case LLauncher.Factory_Reset
                parsing = "恢复出厂设置"
                If data_content(1) = &H1 Then
                    parsing += "-成功"
                ElseIf data_content(1) = &H2 Then
                    parsing += "-读取出厂APP失败"
                ElseIf data_content(1) = &H3 Then
                    parsing += "-APP写入失败"
                Else
                    parsing += $"未知状态：{data_content(1):00}"
                End If
            Case LLauncher.Read_App
                parsing = "同步APP"
                If data_content(1) = &H0 Then
                    parsing += "成功"
                ElseIf data_content(1) = &H1 Then
                    parsing += "失败"
                Else
                    parsing += $"未知状态：{data_content(1):00}"
                End If
            Case LLauncher.Write_Flash
                parsing = "写Flash"
            Case LLauncher.Reset_Source
                If data_content(1) = &H0 Then
                    parsing = "软件复位"
                ElseIf data_content(1) = &H1 Then
                    parsing = "上电复位"
                ElseIf data_content(1) = &H2 Then
                    parsing = "看门狗超时复位"
                ElseIf data_content(1) = &H3 Then
                    parsing = "外部手动复位"
                ElseIf data_content(1) = &H5 Then
                    parsing = "从下电模式唤醒时的复位"
                Else
                    parsing = $"复位源位置：{data_content(1):00}"
                End If
            Case LLauncher.RCUKey_State
                parsing = "RCU按键状态:"
                If data_content(1) = &H0 Then
                    parsing += "点按"
                ElseIf data_content(1) = &H1 Then
                    parsing += "点按"
                ElseIf data_content(1) = &H2 Then
                    parsing += "长按"
                ElseIf data_content(1) = &H3 Then
                    parsing += "长按松开"
                ElseIf data_content(1) = &H4 Then
                    parsing += "达到恢复出厂设置条件"
                Else
                    parsing += $"未知状态：{data_content(1):00}"
                End If
            Case Else
                parsing = " 数据类型错误"
        End Select

        Return parsing
    End Function

    ''' <summary>
    ''' 系统运行信息数据解析
    ''' </summary>
    ''' <param name="data_content"></param>
    ''' <returns></returns>
    Public Function Parsing_LogData_SYS_Record_Content(data_content As Byte()) As String
        Dim data_parsing As String
        'data_parsing = "系统运行数据解析" & BitConverter.ToString(data_content).Replace("-", " ")

        Dim sys_type As Byte = data_content(0)

        Try
            Select Case sys_type
                Case LSYS.PHY_Change
                    If data_content(1) = &H0 Then
                        data_parsing = "网线已拔出"
                    ElseIf data_content(1) = &H1 Then
                        data_parsing = "网线已插入"
                    Else
                        data_parsing = $"PHY状态错误：{data_content(1)}"
                    End If

                Case LSYS.DevInfo_Error
                    data_parsing = $"SRAM设备类型：{data_content(1)} 地址：{data_content(2)} 链表信息读取错误"
                Case LSYS.API_State
                    If data_content(1) = &H1 Then
                        data_parsing = "串口升级 "
                    ElseIf data_content(1) = &H2 Then
                        data_parsing = "网络升级 "
                    Else
                        data_parsing = "错误升级类型 "
                    End If

                    If data_content(2) = &H1 Then
                        data_parsing += "写入成功"
                    ElseIf data_content(2) = &H2 Then
                        data_parsing += "写入失败"
                    ElseIf data_content(2) = &H3 Then
                        data_parsing += "文件块数错误"
                    ElseIf data_content(2) = &H4 Then
                        data_parsing += "MD5校验错误"
                    ElseIf data_content(2) = &H5 Then
                        data_parsing += "CRC校验错误"
                    ElseIf data_content(2) = &H6 Then
                        data_parsing += "跳转Launcher"
                    Else
                        data_parsing += "未知状态"
                    End If

                Case LSYS.NET_ARGC
                    data_parsing = "网络初始化完成后参数：" & vbCrLf
                    data_parsing += $"IP : {data_content(1)}.{data_content(2)}.{data_content(3)}.{data_content(4)}" & vbCrLf
                    data_parsing += $"MAC : {data_content(5)}.{data_content(6)}.{data_content(7)}.{data_content(8)}.{data_content(9)}.{data_content(10)}" & vbCrLf
                    data_parsing += $"服务器IP : {data_content(11)}.{data_content(12)}.{data_content(13)}.{data_content(14)}" & vbCrLf
                    data_parsing += $"TFTP服务器IP : {data_content(15)}.{data_content(16)}.{data_content(17)}.{data_content(18)}" & vbCrLf
                    data_parsing += $"MQTT服务器IP : {data_content(19)}.{data_content(20)}.{data_content(21)}.{data_content(22)}" & vbCrLf
                Case LSYS.MQTT_ARGC
                    data_parsing = "MQTT参数 --- 还没解析"
                Case LSYS.NetComm_State
                    If data_content(1) = &H0 Then
                        data_parsing = "服务器离线"
                    ElseIf data_content(1) = &H1 Then
                        data_parsing = "本地服务器通信正常"
                    ElseIf data_content(1) = &H2 Then
                        data_parsing = "云端服务器通信正常"
                    Else
                        data_parsing = $"云端通讯状态 - 未知状态"
                    End If
                Case LSYS.NET_DafaultARGC
                    data_parsing = "网络默认参数：" & vbCrLf
                    data_parsing += $"IP : {data_content(1)}.{data_content(2)}.{data_content(3)}.{data_content(4)}" & vbCrLf
                    data_parsing += $"网关 : {data_content(5)}.{data_content(6)}.{data_content(7)}.{data_content(8)}" & vbCrLf
                    data_parsing += $"子网掩码 : {data_content(9)}.{data_content(10)}.{data_content(11)}.{data_content(12)}" & vbCrLf
                    data_parsing += $"DNS_IP : {data_content(13)}.{data_content(14)}.{data_content(15)}.{data_content(16)}" & vbCrLf

                    If data_content(17) = &H1 Then
                        data_parsing += "该参数是PC工具设置下发的" & vbCrLf
                    Else
                        data_parsing += "主机默认参数" & vbCrLf
                    End If

                    If data_content(18) = &H2 Then
                        data_parsing += "DHCP功能已关闭" & vbCrLf
                    Else
                        data_parsing += "DHCP功能已开启" & vbCrLf
                    End If

                    If data_content(19) = &H1 Then
                        data_parsing += "使用本地服务器" & vbCrLf
                    Else
                        data_parsing += "使用云端服务器" & vbCrLf
                    End If
                Case LSYS.RCUKey_State
                    data_parsing = "RCU按键状态:"
                    If data_content(1) = &H1 Then
                        data_parsing += "点按"
                    ElseIf data_content(1) = &H2 Then
                        data_parsing += "长按"
                    ElseIf data_content(1) = &H3 Then
                        data_parsing += "长按松开"
                    ElseIf data_content(1) = &H4 Then
                        data_parsing += "达到恢复出厂设置条件"
                    Else
                        data_parsing += $"未知状态：{data_content(1):00}"
                    End If
                Case Else
                    data_parsing = $"系统运行信息 类型错误{sys_type}"
            End Select
        Catch ex As Exception
            data_parsing = "数据异常----"
        End Try


        Return data_parsing
    End Function

    ''' <summary>
    ''' 设备通讯数据解析
    ''' </summary>
    ''' <param name="data_content"></param>
    ''' <returns></returns>
    Public Function Parsing_LogData_Device_COMM_Content(data_content As Byte()) As String
        Dim data_type As Byte = data_content(0)
        Dim data_port As Byte = data_content(1)
        Dim data_parsing As String = Nothing
        Dim data_baud As UInt32

        If data_content.Length < 7 Then Return data_parsing     '长度不对直接退出

        Dim data_buff(data_content.Length - 7) As Byte

        Array.Copy(data_content, 6, data_buff, 0, data_content.Length - 6)

        data_baud = data_content(5)
        data_baud = (data_baud << 8) Or data_content(4)
        data_baud = (data_baud << 8) Or data_content(3)
        data_baud = (data_baud << 8) Or data_content(2)

        Select Case data_type
            Case LCOMM.Adjust_Baud

                data_baud = data_content(6)
                data_baud = (data_baud << 8) Or data_content(5)
                data_baud = (data_baud << 8) Or data_content(4)
                data_baud = (data_baud << 8) Or data_content(3)

                data_parsing = Obtaining_The_Device_Type(data_content(1))
                data_parsing += $" 地址:{data_content(2)}"
                data_parsing += $" 切换波特率:{data_baud}" & vbCrLf

                '2022-07-12 增加切换波特率原因 长度增加4Byte
                If data_content.Length = 11 Then
                    If data_content(7) = &H1 Then
                        data_parsing += $" 连续通讯失败{data_content(8)}次" & vbCrLf
                    ElseIf data_content(7) = &H2 Then

                        data_parsing += $" 通讯百分比达到上限 失败次数:{data_content(8)},记录总包数:{data_content(8)}" & vbCrLf
                    Else

                    End If
                End If

            Case LCOMM.ASK_TO_Reply
                data_parsing = $"Port_{data_port} "
                data_parsing += $"Baud:{data_baud} "
                data_parsing += "轮询变化:" & BitConverter.ToString(data_buff).Replace("-", " ") & vbCrLf
                'Parses_The_RelayContent_Of_The_Packet(data_buff, data_port)
            Case LCOMM.Control_Reply
                data_parsing = $"Port_{data_port} "
                data_parsing += $"Baud:{data_baud} "
                data_parsing += "控制回复:" & BitConverter.ToString(data_buff).Replace("-", " ") & vbCrLf
                'data_parsing += Parses_The_RelayContent_Of_The_Packet(data_buff, data_port)
            Case LCOMM.Send_Control
                data_parsing = $"Port_{data_port} "
                data_parsing += $"Baud:{data_baud} "
                data_parsing += "控制下发:" & BitConverter.ToString(data_buff).Replace("-", " ") & vbCrLf

            Case Else
                data_parsing = "类型错误:" & BitConverter.ToString(data_content).Replace("-", " ")
        End Select

        Return data_parsing
    End Function

    ''' <summary>
    ''' 设备通讯状态数据解析
    ''' </summary>
    ''' <param name="data_content"></param>
    ''' <returns></returns>
    Public Function Parsing_LogData_Device_Online_Content(data_content As Byte()) As String
        Dim dev_type As Byte = data_content(0)
        Dim dev_addr As Byte = data_content(1)
        Dim dev_state As Byte = data_content(2)
        Dim data_parsing As String

        data_parsing = Obtaining_The_Device_Type(dev_type)

        data_parsing += $" 地址:{dev_addr} "
        If dev_state = LOG_DEV_State.Offline Then
            data_parsing += "离线" & vbCrLf
        ElseIf dev_state = LOG_DEV_State.Online Then
            data_parsing += "在线" & vbCrLf
        Else
            data_parsing += $"状态错误:{dev_state}" & vbCrLf
        End If

        Return data_parsing
    End Function

    ''' <summary>
    ''' 所有设备状态定期保存数据解析
    ''' </summary>
    ''' <param name="data_content"></param>
    ''' <returns></returns>
    Public Function Parsing_LogData_Global_Parameters_Content(data_content As Byte()) As String
        Dim data_parsing As String
        data_parsing = "所有设备状态定期保存数据解析" & BitConverter.ToString(data_content).Replace("-", " ")
        Return data_parsing
    End Function

    ''' <summary>
    ''' 网络处理记录信息解析
    ''' </summary>
    ''' <param name="data_content"></param>
    ''' <returns></returns>
    Public Function Parsing_LogData_Net_COMM_Content(data_content As Byte()) As String
        Dim data_parsing As String

        Dim net_type As Byte = data_content(0)
        Dim net_port As UInt16

        Select Case net_type
            Case LNetComm.N_Recv
                Try
                    data_parsing = $"网络接收数据 SocketId{data_content(1)}  "
                    data_parsing += $"IP:{data_content(2)}.{data_content(3)}.{data_content(4)}.{data_content(5)}"
                    net_port = data_content(7)
                    net_port <<= 8
                    net_port = net_port Or data_content(6)
                    data_parsing += $"Port:{net_port}"
                    data_parsing += BitConverter.ToString(data_content， 8).Replace("-", " ")
                Catch ex As Exception
                    data_parsing = "网络数据解析错误：" & BitConverter.ToString(data_content， 1).Replace("-", " ")
                End Try

            Case LNetComm.N_Send
                Try
                    data_parsing = $"网络发送数据 SocketId{data_content(1)}  "
                    data_parsing += $"IP:{data_content(2)}.{data_content(3)}.{data_content(4)}.{data_content(5)}"
                    net_port = data_content(7)
                    net_port <<= 8
                    net_port = net_port Or data_content(6)
                    data_parsing += $"Port:{net_port}"
                    data_parsing += BitConverter.ToString(data_content， 8).Replace("-", " ")
                Catch ex As Exception
                    data_parsing = "网络数据解析错误：" & BitConverter.ToString(data_content， 1).Replace("-", " ")
                End Try

            Case Else
                data_parsing = "网络处理信息记录类型错误"
        End Select

        Return data_parsing
    End Function

    ''' <summary>
    ''' 事件处理记录信息解析
    ''' </summary>
    ''' <param name="data_content"></param>
    ''' <returns></returns>
    Public Function Parsing_LogData_Logic_Record_Content(data_content As Byte()) As String
        Dim data_parsing As String

        Dim dataArray() As Byte = data_content.Skip(1).ToArray()
        Dim logic_type As Byte = data_content(0)

        Select Case logic_type
            Case LLogic.L_DebugString
                data_parsing = "调试日志 : " & System.Text.Encoding.Default.GetString(dataArray)
            Case Else
                data_parsing = "事件处理记录信息解析 : " & BitConverter.ToString(data_content).Replace("-", " ")

        End Select


        Return data_parsing
    End Function

    Private Sub Grid_Format_initial()
        '新表格控件
        With Grid1

            .AutoRedraw = False    '禁止刷
            .Rows = 6           '返回或设置表格的行数
            .Cols = 8
            .DefaultFont = New Font("Tahoma", 8)       '设置字体
            .ExtendLastCol = True       '设置扩展最后一列的列宽，让表格可以充满控件
            .BackColor1 = Color.FromArgb(231, 235, 247)
            .GridColor = Color.FromArgb(148, 190, 231)

            .Cell(0, 1).Text = "类型"
            .Cell(0, 2).Text = "序号"
            .Cell(0, 3).Text = "日期"
            .Cell(0, 4).Text = "时间"
            .Cell(0, 5).Text = "间隔时间(ms)"
            .Cell(0, 6).Text = "数据长度"
            .Cell(0, 7).Text = "数据内容"

            .Column(1).CellType = FlexCell.CellTypeEnum.TextBox
            .Column(2).CellType = FlexCell.CellTypeEnum.TextBox
            .Column(3).CellType = FlexCell.CellTypeEnum.TextBox
            .Column(4).CellType = FlexCell.CellTypeEnum.TextBox
            .Column(5).CellType = FlexCell.CellTypeEnum.TextBox
            .Column(6).CellType = FlexCell.CellTypeEnum.TextBox
            .Column(7).CellType = FlexCell.CellTypeEnum.TextBox

            .Column(1).Alignment = FlexCell.AlignmentEnum.CenterCenter
            .Column(2).Alignment = FlexCell.AlignmentEnum.CenterCenter
            .Column(3).Alignment = FlexCell.AlignmentEnum.CenterCenter
            .Column(4).Alignment = FlexCell.AlignmentEnum.CenterCenter
            .Column(5).Alignment = FlexCell.AlignmentEnum.CenterCenter
            .Column(6).Alignment = FlexCell.AlignmentEnum.CenterCenter          '居中对齐
            .Column(7).Alignment = FlexCell.AlignmentEnum.LeftCenter            '左对齐

            .SelectionMode = FlexCell.SelectionModeEnum.ByRow        '整行选取

            .DisplayRowNumber = True       '开启行号
            .AutoRedraw = True
            .Refresh()          '加载数据

        End With
    End Sub

    Public Sub File_Data_Parsing_To_List(file_data As List(Of Byte()))
        Dim data_num As Int32 = file_data.Count

        Dim hour_tick As Int32
        Dim hour_temp As Int32
        Dim data_date As Int32

        Console.WriteLine($"当前有效数据总包数:{data_num}")

        tb_DataLen.Text = data_num


        For idx = 0 To data_num - 1

            tb_DataProcessingIdx.Text = idx

            Dim save_data As New Parsing_Data_List
            Dim parsing_string As String

            '数据类型及长度等
            save_data.original_data = file_data(idx)
            save_data.sn = file_data(idx)(LOG_DATA_FORMAT.SN)
            save_data.type = file_data(idx)(LOG_DATA_FORMAT.Type)
            hour_temp = file_data(idx)(LOG_DATA_FORMAT.Len_8)
            save_data.len = (file_data(idx)(LOG_DATA_FORMAT.Len) Or (hour_temp << 8)) - LOG_DATA_FORMAT.Data       '数据长度

            If save_data.len > Log_Data_Len_Max Then
                'save_data.len = Log_Data_Len_Max 数据长度超过数据最大长度
                Return
            End If

            '日期
            data_date = (file_data(idx)(LOG_DATA_FORMAT.Date_L) And &HFF)                    '记录时间
            hour_temp = file_data(idx)(LOG_DATA_FORMAT.Date_H)
            data_date = data_date Or (hour_temp << 8)

            hour_tick = file_data(idx)(LOG_DATA_FORMAT.Time8B)
            hour_temp = file_data(idx)(LOG_DATA_FORMAT.Time16B)
            hour_tick = hour_tick Or (hour_temp << 8)
            hour_temp = file_data(idx)(LOG_DATA_FORMAT.Time24B)
            hour_tick = hour_tick Or (hour_temp << 16)
            hour_temp = file_data(idx)(LOG_DATA_FORMAT.Time32B)
            hour_tick = hour_tick Or (hour_temp << 24)

            save_data.tick.year = (data_date >> 10) And &H1F
            save_data.tick.month = (data_date >> 5) And &H1F
            save_data.tick.day = (data_date) And &H1F

            '时间
            save_data.tick.hour = hour_tick \ 3600000
            hour_temp = hour_tick Mod 3600000
            save_data.tick.minute = hour_temp \ 60000
            hour_temp = hour_temp Mod 60000
            save_data.tick.second = hour_temp \ 1000
            save_data.tick.milliscond = hour_temp Mod 1000

            If save_data.tick.hour >= 24 Then
                save_data.tick.hour -= 24
                save_data.tick.day += 1
            End If

            '分离文件内容中的数据
            Dim copy As UInt16 = save_data.len - 1
            Dim parsing_data(copy - 1) As Byte

            Array.Copy(file_data(idx), LOG_DATA_FORMAT.Data, parsing_data, 0, copy)

            save_data.data = parsing_data
            parsing_string = BitConverter.ToString(parsing_data)
            parsing_string = parsing_string.Replace("-", " ")
            Console.WriteLine($"parsing_string:{parsing_string}")
            BLV_INFO.Debug_Info_Display_On_Window(DEBUG_WIN.File_Info, parsing_string, Color.Tan)

            parsing_string = $"Data SN:{save_data.sn:d} TYPE:{save_data.type:d} Len:{save_data.len:d} data_date:{data_date:X} hour_tick:{hour_tick:X}"
            Console.WriteLine(parsing_string)
            BLV_INFO.Debug_Info_Display_On_Window(DEBUG_WIN.File_Info, parsing_string, Color.SlateGray)

            save_data.parsing = Parsing_Data_Content(save_data.type, parsing_data)        '解析数据
            Console.WriteLine(save_data.parsing)
            save_data.interval_time = Get_Data_Time_Difference2(Log_Data, save_data)

            BLV_INFO.Debug_Info_Display_On_Window(DEBUG_WIN.File_Info, save_data.parsing, Color.Magenta)

            '将解析后的数据添加到列表中
            Log_Data.Add(save_data)

            Grid_ADD_LOG_Data(Log_Data, Grid1)

            delay(1)
        Next

    End Sub

    ''' <summary>
    ''' 将数据显示到表格中
    ''' </summary>
    ''' <param name="data_list"></param>
    Public Sub Grid_ADD_LOG_Data(data_list As List(Of Parsing_Data_List), show_grid As FlexCell.Grid)
        Dim temp_num As Int32
        Dim temp_string As String
        '将数据对应的序号填充到对应的行号中

        If data_list.Count > show_grid.Rows - 1 Then
            Console.WriteLine("Grid - 添加新行")
            show_grid.AddItem(" ", True)        '添加新行

        End If

        temp_num = data_list.Count - 1      '获取当前数据列表中有多少条数据

        temp_string = $"List Count:{temp_num} Rows:{show_grid.Rows}"
        Console.WriteLine(temp_string)
        BLV_INFO.Debug_Info_Display_On_Window(DEBUG_WIN.File_Info, temp_string, Color.Blue)

        'show_grid.AddItem(" ", True)        '添加新行
        show_grid.Cell(data_list.Count, form_grid1.type + 1).Text = Parsing_Data_Type(data_list(temp_num).type)
        show_grid.Cell(data_list.Count, form_grid1.sn + 1).Text = data_list(temp_num).sn
        show_grid.Cell(data_list.Count, form_grid1.data_len + 1).Text = data_list(temp_num).len
        temp_string = $"20{data_list(temp_num).tick.year:00}-{data_list(temp_num).tick.month:00}-{data_list(temp_num).tick.day:00}"
        show_grid.Cell(data_list.Count, form_grid1.data_date + 1).Text = temp_string
        temp_string = $"{data_list(temp_num).tick.hour:00}:{data_list(temp_num).tick.minute:00}:{data_list(temp_num).tick.second:00}.{data_list(temp_num).tick.milliscond:000}"
        show_grid.Cell(data_list.Count, form_grid1.data_time + 1).Text = temp_string
        show_grid.Cell(data_list.Count, form_grid1.data_interval_time + 1).Text = data_list(temp_num).interval_time
        show_grid.Cell(data_list.Count, form_grid1.data_content + 1).Text = data_list(temp_num).parsing
    End Sub


    ''' <summary>
    ''' 设备通讯数据解析 - 同时解析设备通讯数据内容，用于显示在界面"数据详细"
    ''' </summary>
    ''' <param name="data_content"></param>
    ''' <returns></returns>
    Public Function Expatiation_Parsing_LogData_Device_COMM_Content(data_content As Byte()) As String
        Dim data_type As Byte = data_content(0)
        Dim data_port As Byte = data_content(1)
        Dim data_parsing As String
        Dim data_baud As UInt32
        Dim data_buff(data_content.Length - 7) As Byte

        Array.Copy(data_content, 6, data_buff, 0, data_content.Length - 6)

        data_baud = data_content(5)
        data_baud = (data_baud << 8) Or data_content(4)
        data_baud = (data_baud << 8) Or data_content(3)
        data_baud = (data_baud << 8) Or data_content(2)

        Select Case data_type
            Case LCOMM.Adjust_Baud

                data_baud = data_content(6)
                data_baud = (data_baud << 8) Or data_content(5)
                data_baud = (data_baud << 8) Or data_content(4)
                data_baud = (data_baud << 8) Or data_content(3)

                data_parsing = Obtaining_The_Device_Type(data_content(1))
                data_parsing += $" 地址:{data_content(2)}"
                data_parsing += $" 切换波特率:{data_baud}" & vbCrLf
            Case LCOMM.ASK_TO_Reply
                data_parsing = $"Port_{data_port} "
                data_parsing += $"Baud:{data_baud} "
                data_parsing += "轮询变化:" & BitConverter.ToString(data_buff).Replace("-", " ") & vbCrLf
                data_parsing += Parses_The_RelayContent_Of_The_Packet(data_buff, data_port)
            Case LCOMM.Control_Reply
                data_parsing = $"Port_{data_port} "
                data_parsing += $"Baud:{data_baud} "
                data_parsing += "控制回复:" & BitConverter.ToString(data_buff).Replace("-", " ") & vbCrLf
                data_parsing += Parses_The_RelayContent_Of_The_Packet(data_buff, data_port)
            Case LCOMM.Send_Control
                data_parsing = $"Port_{data_port} "
                data_parsing += $"Baud:{data_baud} "
                data_parsing += "控制下发:" & BitConverter.ToString(data_buff).Replace("-", " ") & vbCrLf

            Case Else
                data_parsing = "类型错误:" & BitConverter.ToString(data_content).Replace("-", " ")
        End Select

        Return data_parsing
    End Function


    ''' <summary>
    ''' 详细解析数据内容
    '''     按照数据类型来解析,用于点击表格中行时的显示详细的内容解析
    ''' </summary>
    ''' <param name="data_type"></param>
    ''' <param name="data_content"></param>
    ''' <returns></returns>
    Public Function Expatiation_Parsing_Data_Content(data_type As Byte, data_content As Byte()) As String
        Dim parsing As String = "无"

        Dim dev_temp As New Device_Temp

        Select Case data_type
            Case log_type.Launcher
                parsing = Parsing_LogData_Launcher_Content(data_content)
            Case log_type.SYS_Record
                parsing = Parsing_LogData_SYS_Record_Content(data_content)
            Case log_type.Device_COMM
                parsing = Expatiation_Parsing_LogData_Device_COMM_Content(data_content)
            Case log_type.Device_Online
                parsing = Parsing_LogData_Device_Online_Content(data_content)
            Case log_type.Global_Parameters
                parsing = Parsing_LogData_Global_Parameters_Content(data_content)
            Case log_type.Net_COMM
                parsing = Parsing_LogData_Net_COMM_Content(data_content)
            Case log_type.Logic_Record
                parsing = Parsing_LogData_Logic_Record_Content(data_content)
            Case Else
                parsing = "数据类型错误"
        End Select

        Return parsing
    End Function

    ''' <summary>
    ''' 在表格行头添加序号 - 通过行状态变化事件
    ''' </summary>
    ''' <param name="sender"></param>
    ''' <param name="e"></param>
    Private Sub DataGridView1_RowStateChanged(sender As Object, e As DataGridViewRowStateChangedEventArgs)
        e.Row.HeaderCell.Value = (e.Row.Index + 1).ToString() '添加序号
    End Sub


    Private Sub CheckBox1_CheckedChanged(sender As Object, e As EventArgs) Handles CheckBox1.CheckedChanged
        If CheckBox1.Checked Then
            SplitContainer1.Panel2Collapsed = False
        Else
            SplitContainer1.Panel2Collapsed = True
        End If
    End Sub


    Private Sub CheckBox2_CheckedChanged(sender As Object, e As EventArgs) Handles CheckBox2.CheckedChanged
        If CheckBox2.Checked Then
            SplitContainer2.Panel2Collapsed = False
        Else
            SplitContainer2.Panel2Collapsed = True
        End If
    End Sub

    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load

        Me.Text = "数据解析工具(" & Application.ProductVersion & ")"

        '是否折叠文件解析 显示页面
        If CheckBox1.Checked Then
            SplitContainer1.Panel2Collapsed = False
        Else
            SplitContainer1.Panel2Collapsed = True
        End If

        Grid_Format_initial()

        Form_C5IO.Get_C5IO_TextBox_Name()
    End Sub

    Private Sub Form1_FormClosed(sender As Object, e As FormClosedEventArgs) Handles MyBase.FormClosed
        Form_C5IO.Save_C5IO_TextBox_Name()
    End Sub



    Private Sub Grid1_RowColChange(Sender As Object, e As FlexCell.Grid.RowColChangeEventArgs) Handles Grid1.RowColChange
        Console.WriteLine($"Grid1_RowColChange Rows:{Grid1.ActiveCell.IntegerValue}")   '当前选中的单元格的内容
        Console.WriteLine($"Grid1_RowColChange Rows:{Grid1.ActiveCell.Row}")            '当前选中单元格的行

        '取当前行号，到日志数据列表中取日志数据内容，重新解析一下

        '遇到问题，重新打开文件时，这事件会进入，然后队列溢出了

        'If Grid1.ActiveCell.Row = 0 Then
        '    MsgBox("Grid1_RowColChange ERROR")           '弹框显示内容
        '    Return
        'End If

        'If Log_Data.Count = 0 Then
        '    MsgBox("LOG_DATA ERROR")           '弹框显示内容
        '    Return
        'End If

        'Dim row_num As Int64 = Grid1.ActiveCell.Row
        'Dim row_data As Byte() = Log_Data(Grid1.ActiveCell.Row - 1).data
        'Dim row_parsing As String = "Grid1_Row Data:" & BitConverter.ToString(row_data).Replace("-", " ") & vbCrLf

        'Console.WriteLine(row_parsing)

        Try
            Dim row_num As Int64 = Grid1.ActiveCell.Row - 1     '取当前选中行在队列中的序号
            Dim row_parsing As String = "Grid1_Row Data:" & BitConverter.ToString(Log_Data(row_num).data).Replace("-", " ") & vbCrLf

            BLV_INFO.Debug_Display_Clear(DEBUG_WIN.Content_Info)

            '调取该行的信息显示在调试框中
            row_parsing = "日志原始数据：" & BitConverter.ToString(Log_Data(row_num).original_data).Replace("-", " ")
            BLV_INFO.Debug_Info_Display_On_Window(DEBUG_WIN.Content_Info, row_parsing, Color.Black)

            row_parsing = $"<序号>：{Log_Data(row_num).sn}" & vbTab

            row_parsing += "<类型>：" & Parsing_Data_Type(Log_Data(row_num).type) & vbTab

            row_parsing += $"<日志长度>：{Log_Data(row_num).len}" & vbTab

            row_parsing += "<时间>：" & $"20{Log_Data(row_num).tick.year:00}-{Log_Data(row_num).tick.month:00}-{Log_Data(row_num).tick.day:00} " & $"{Log_Data(row_num).tick.hour:00}:{Log_Data(row_num).tick.minute:00}:{Log_Data(row_num).tick.second:00}.{Log_Data(row_num).tick.milliscond:000}"
            BLV_INFO.Debug_Info_Display_On_Window(DEBUG_WIN.Content_Info, row_parsing, Color.Black)


            row_parsing = $"<间隔时间>：{Log_Data(row_num).interval_time}" & "ms"
            BLV_INFO.Debug_Info_Display_On_Window(DEBUG_WIN.Content_Info, row_parsing, Color.Black)

            row_parsing = "<记录内容>：" & BitConverter.ToString(Log_Data(row_num).data).Replace("-", " ") & vbCrLf
            BLV_INFO.Debug_Info_Display_On_Window(DEBUG_WIN.Content_Info, row_parsing, Color.Black)

            If Log_Data(row_num).type = log_type.Device_COMM Then

                '同时将解析的数据通过控件显示出来
                'TabControl1.TabPages.Clear()

                'Dim tab_page As TabPage = New TabPage("C5IO")
                'Dim tab_page2 As TabPage = New TabPage("C5Music")
                'Dim tab_page3 As TabPage = New TabPage("温控器")

                'tab_page.Controls.Add(Form_C5IO.Panel1)
                'Form_C5IO.Panel1.Dock = DockStyle.Fill
                'TabControl1.TabPages.Add(tab_page)

                'tab_page2.Controls.Add(Form_C5Music.Panel1)
                'Form_C5Music.Panel1.Dock = DockStyle.Fill
                'TabControl1.TabPages.Add(tab_page2)

                'tab_page3.Controls.Add(Form_DevTemp.Panel1)
                'Form_DevTemp.Panel1.Dock = DockStyle.Fill
                'TabControl1.TabPages.Add(tab_page3)

                '如果当前日志数据是通讯数据的话，需要解析串口数据并显示出来
                row_parsing = "解析串口数据 内容详细：" & Expatiation_Parsing_Data_Content(log_type.Device_COMM, Log_Data(row_num).data)
                BLV_INFO.Debug_Info_Display_On_Window(DEBUG_WIN.Content_Info, row_parsing, Color.Black)


            ElseIf Log_Data(row_num).type = log_type.SYS_Record Then
                row_parsing = "内容详细：" & Log_Data(row_num).parsing
                BLV_INFO.Debug_Info_Display_On_Window(DEBUG_WIN.Content_Info, row_parsing, Color.Black)
            Else
                '如果是其他数据，直接显示解析的内容

            End If

            Console.WriteLine(row_parsing)
        Catch ex As Exception
            Console.WriteLine("Grid1_RowColChange ERROR")
        End Try


    End Sub

    Private Sub RichTextBox1_TextChanged(sender As Object, e As EventArgs) Handles RichTextBox1.TextChanged
        If RichTextBox1.TextLength >= 1000000 Then RichTextBox1.Clear()
    End Sub


End Class